ORTOFON

Celebrul si mult asteptatul fabricant de doze ORTOFON, Nr. 1 Mondial, ajunge in Romania,
oficial, incepand cu 1 Iunie 2011, in EXCLUSIVITATE la STEREO PLANET - asa cum v-ati obisnuit deja.

Incepand cu 1948, cand prima doza Moving Coil a iesit pe piata, ORTOFON a inceput sa
scrie istorie si sa-si scrie propria istorie de succes care dureaza si in prezent.
Cu o gama absolut impresionanta, atat numeric (vasta) cat si, mai ales calitativ, se adreseaza
practic oricarui tip de utilizator, de la segmentul entry - level pana la segmentul high-end si
ultra high-end.

Bucurati-va, impreuna cu noi, de ORTOFON!

Ortofon TA-110 9" static-balance tonearm
TA-110 has gone to the next level by reducing unwanted vibrations in the tonearm

Ortofon's material know-how is the first area of the Ortofon technology that was applied when developing the TA-110.
As a specialist in technical rubber, Ortofon used one of its special rubber compounds when creating the specially shaped rubber with high vibration dampening properties.
The rubber pieces are produced at the Ortofon technical rubber facilities in Nakskov.

The second area of Ortofon technology is the extensive knowledge of vibration properties and characteristics.
Ortofon has acquired this know-how via the developement of Bone conductors for the hearing aid industry.
By using this knowledge and the related computer programs that simulated vibration in different shapes and materials, Ortofon came up with an optimized TA-110.

The TA-110 is a product with great benefits for the discerning analogue user.

The TA-110 is given a precision machined slit in the middle of the aluminium tube.
A piece of Ortofon's special vibration damping rubber is inserted into the slit.
An armtube without slit and rubber damper is symmetrical in a vertical and lateral plane with respect to vibrations.
The slit breaks this symmetry, and mounting the rubber insert gives the desired damping.

Features
TA-110 is a static balance gimbal type arm, easy to use and adjust for optimal VTF settings
TA-110 has a standard 5-pin DIN connector for tonearm cable
The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
Counterweight with Inner/Outer scale (Inner scale to be applied with main counterweight, Outer scale to be applied when extra mass ring is added)
Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
TA-110 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
Extra mass ring for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)
Extra mass ring weight 45g

Specifications
Effective mass without headshell: 3.5 g
Mass of supplied headshell: 15.5 g
Effective armlength (distance between the stylus and pivot point): 231 mm
Mounting distance (distance between the pivot point and turntable center): 213 mm
Offset angle: 23.9 degrees
Overhang: 18 mm
Tracking force adjusting range (direct reading): 0-3 g
Height adjustment range: 35-55 mm
Diameter of the armbase mounting hole: 19-20 mm
Diameter of the center shaft of tonearm: 18.0 mm
Inner null point: 66 mm
Outer null point: 120.9 mm
Counterweight for cartridge + headshell mass between 21 and 28 g included
Headshell LH-2000E included

Headshell weight: 15.5 g
TA-110 total weight including headshell: 470 g
Set of tonearm cables 6NX-TSW-1010 included
Extra mass ring for heavier cartridges included
Extra mass ring weight: 45g

Celebrul si mult asteptatul fabricant de doze ORTOFON, Nr. 1 Mondial, ajunge in Romania,
oficial, incepand cu 1 Iunie 2011, in EXCLUSIVITATE la STEREO PLANET - asa cum v-ati obisnuit deja.

Incepand cu 1948, cand prima doza Moving Coil a iesit pe piata, ORTOFON a inceput sa
scrie istorie si sa-si scrie propria istorie de succes care dureaza si in prezent.
Cu o gama absolut impresionanta, atat numeric (vasta) cat si, mai ales calitativ, se adreseaza
practic oricarui tip de utilizator, de la segmentul entry - level pana la segmentul high-end si
ultra high-end.

Bucurati-va, impreuna cu noi, de ORTOFON!

Ortofon TA-110 9" static-balance tonearm
TA-110 has gone to the next level by reducing unwanted vibrations in the tonearm

Ortofon's material know-how is the first area of the Ortofon technology that was applied when developing the TA-110.
As a specialist in technical rubber, Ortofon used one of its special rubber compounds when creating the specially shaped rubber with high vibration dampening properties.
The rubber pieces are produced at the Ortofon technical rubber facilities in Nakskov.

The second area of Ortofon technology is the extensive knowledge of vibration properties and characteristics.
Ortofon has acquired this know-how via the developement of Bone conductors for the hearing aid industry.
By using this knowledge and the related computer programs that simulated vibration in different shapes and materials, Ortofon came up with an optimized TA-110.

The TA-110 is a product with great benefits for the discerning analogue user.

The TA-110 is given a precision machined slit in the middle of the aluminium tube.
A piece of Ortofon's special vibration damping rubber is inserted into the slit.
An armtube without slit and rubber damper is symmetrical in a vertical and lateral plane with respect to vibrations.
The slit breaks this symmetry, and mounting the rubber insert gives the desired damping.

Features
TA-110 is a static balance gimbal type arm, easy to use and adjust for optimal VTF settings
TA-110 has a standard 5-pin DIN connector for tonearm cable
The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
Counterweight with Inner/Outer scale (Inner scale to be applied with main counterweight, Outer scale to be applied when extra mass ring is added)
Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
TA-110 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
Extra mass ring for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)
Extra mass ring weight 45g

Specifications
Effective mass without headshell: 3.5 g
Mass of supplied headshell: 15.5 g
Effective armlength (distance between the stylus and pivot point): 231 mm
Mounting distance (distance between the pivot point and turntable center): 213 mm
Offset angle: 23.9 degrees
Overhang: 18 mm
Tracking force adjusting range (direct reading): 0-3 g
Height adjustment range: 35-55 mm
Diameter of the armbase mounting hole: 19-20 mm
Diameter of the center shaft of tonearm: 18.0 mm
Inner null point: 66 mm
Outer null point: 120.9 mm
Counterweight for cartridge + headshell mass between 21 and 28 g included
Headshell LH-2000E included

Headshell weight: 15.5 g
TA-110 total weight including headshell: 470 g
Set of tonearm cables 6NX-TSW-1010 included
Extra mass ring for heavier cartridges included
Extra mass ring weight: 45g

		Producator: --- Selecteaza producator --- ACOUSTIC REVIVEACOUSTIC SOLIDACROLINKACUSTICA APPLICATAADL by FURUTECHAIDAS CARTRIDGESAIR TIGHTAKIKOANALOG RELAXAPOLLOARTEARTESANIA AUDIOASTELL & KERNATACAMA AUDIOATLAS CABLESAUDIENCEAUDIO ENGINEERSAUDIO HUNGARYAUDIO REPLASAUDIO SELECTIONAUDIO SUSPENSIONAUDIOMATAYREBATBELBENZ MICROBERGMANNBEYERDYNAMICBLUE HORIZONBOULDERBRIGADIERBURMESTERBYBEE TECHNOLOGIESCA ELECTRONICSCAMBRIDGE AUDIOCARDASCARY AUDIOCHARIOCLEARAUDIOCOLD RAYCUBE AUDIOCUSTOM DESIGNDAVID LABOGADAVONEDIESIS AUDIODIPTYQUEDIVINE ACOUSTICSDR. FEICKERT ANALOGUEDS AUDIODSPeakerDUALDYNAUDIODeVORE FIDELITYELECTRO HARMONIXELROGENTREQESPRITESSENTIAL AUDIO TOOLSETSURO URUSHIFABIO & SONFINALEFOSTEXFRANC AUDIOFRANCO SERBLINFURUTECHFYNE AUDIOGENALEXGENERAL ELECTRICGIGAWATTGOLDMUNDGOLDRINGGRADOGRAHAM SLEEGRANDINOTEGUTWIREHARBETHHARMONIC TECHNOLOGYHARMONIXHECOHiFiMANI-QUALISOL - 8ISOTEKIsoAcousticsJ JJAMOJEFF ROWLANDJELCOJMRKEFKIMBER KABLEKLIPSCHKOETSUKORAKR AUDIOLEBENLEHMANN AUDIOLES DAVIS AUDIOLESS LOSSLEVIN DESIGNLITTLE FWENDLITTLE FWENDLIVING VOICEMACTONEMASTERSOUNDMERASONMICROMEGAMILTYMISTRALMIT CABLESMIYAJIMA LABSMOFIMOFIMOONMOONRIVERMOOO MATMURASAKINOMUSIC HALLMUSICAL FIDELITYMY SONIC LABNAFNAGAOKANASOTECNAT AUDIONIME AUDIODESIGNNITTY GRITTYNORDOSTOEHLBACHOKKI NOKKIONKYOOPERAORB AUDIOORTOFONOYAIDEPARASOUNDPHASEMATIONPHILIPSPHONARPLINIUS AUDIOPRIMAREPRIMAREPS AUDIOPSVANEQ ACOUSTICSQEDRCAREGARELRICABLEROKSANROOM's AudioSCANDYNASCHROERS & SCHROERSSHELTERSHINOLASHUNYATASIEVEKING SoundSIMPLY ANALOGSINTHESYSSMESOLID TECHSOUL NOTESOUNDSMITHSOVTEKSSCSTAXSUGDENSUMIKOSUPRA CABLESSUTHERLANDSYMPHONIC LINESYMPOSIUM ACOUSTICSSYNTHESISTADTAKATSUKITANNOYTAOCTEKTRONTHORENSTIGLONTITAN AUDIOTON TRAGERTONARTORUS POWERTORUS POWERTRACK AUDIOTRANSFIGURATIONTRANSROTORTRENNER & FRIEDLTRIODE LABTUNG-SOLTUNGSRAMULTRASONEUNISON RESEARCHVENTOVERMOUTHVIV LABVIVID AUDIOVPIWATTGATEWAVACWIREWORLDWOODEN BULLYAMAMOTOYTER CABLESZAVFINOZESTO AUDIOZYXfo.QhORNS Produs: --- Selecteaza produs ---
Imagine
Produs	ORTOFON Tonearm TA-110
Descriere	Celebrul si mult asteptatul fabricant de doze ORTOFON, Nr. 1 Mondial, ajunge in Romania, oficial, incepand cu 1 Iunie 2011, in EXCLUSIVITATE la STEREO PLANET - asa cum v-ati obisnuit deja.
Specificatii	Celebrul si mult asteptatul fabricant de doze ORTOFON, Nr. 1 Mondial, ajunge in Romania, oficial, incepand cu 1 Iunie 2011, in EXCLUSIVITATE la STEREO PLANET - asa cum v-ati obisnuit deja. Incepand cu 1948, cand prima doza Moving Coil a iesit pe piata, ORTOFON a inceput sa scrie istorie si sa-si scrie propria istorie de succes care dureaza si in prezent. Cu o gama absolut impresionanta, atat numeric (vasta) cat si, mai ales calitativ, se adreseaza practic oricarui tip de utilizator, de la segmentul entry - level pana la segmentul high-end si ultra high-end. Bucurati-va, impreuna cu noi, de ORTOFON! Ortofon TA-110 9" static-balance tonearm TA-110 has gone to the next level by reducing unwanted vibrations in the tonearm Ortofon's material know-how is the first area of the Ortofon technology that was applied when developing the TA-110. As a specialist in technical rubber, Ortofon used one of its special rubber compounds when creating the specially shaped rubber with high vibration dampening properties. The rubber pieces are produced at the Ortofon technical rubber facilities in Nakskov. The second area of Ortofon technology is the extensive knowledge of vibration properties and characteristics. Ortofon has acquired this know-how via the developement of Bone conductors for the hearing aid industry. By using this knowledge and the related computer programs that simulated vibration in different shapes and materials, Ortofon came up with an optimized TA-110. The TA-110 is a product with great benefits for the discerning analogue user. The TA-110 is given a precision machined slit in the middle of the aluminium tube. A piece of Ortofon's special vibration damping rubber is inserted into the slit. An armtube without slit and rubber damper is symmetrical in a vertical and lateral plane with respect to vibrations. The slit breaks this symmetry, and mounting the rubber insert gives the desired damping. Features TA-110 is a static balance gimbal type arm, easy to use and adjust for optimal VTF settings TA-110 has a standard 5-pin DIN connector for tonearm cable The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations) Counterweight with Inner/Outer scale (Inner scale to be applied with main counterweight, Outer scale to be applied when extra mass ring is added) Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g TA-110 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template Extra mass ring for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force) Extra mass ring weight 45g Specifications Effective mass without headshell: 3.5 g Mass of supplied headshell: 15.5 g Effective armlength (distance between the stylus and pivot point): 231 mm Mounting distance (distance between the pivot point and turntable center): 213 mm Offset angle: 23.9 degrees Overhang: 18 mm Tracking force adjusting range (direct reading): 0-3 g Height adjustment range: 35-55 mm Diameter of the armbase mounting hole: 19-20 mm Diameter of the center shaft of tonearm: 18.0 mm Inner null point: 66 mm Outer null point: 120.9 mm Counterweight for cartridge + headshell mass between 21 and 28 g included Headshell LH-2000E included Headshell weight: 15.5 g TA-110 total weight including headshell: 470 g Set of tonearm cables 6NX-TSW-1010 included Extra mass ring for heavier cartridges included Extra mass ring weight: 45g
Premii
Preţ:	5,799.00 RON (TVA inclus)
Disponibilitate	Intreaba / Suna

Adauga review
Ascunde review